Installation manual

Section 5 F Upgrading Software on Client-Server Systems
58
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
5.2.2 Dumping Data from ENVOX and Op en Databases — ENVOX
P2.x, P3.0, P3.2 and P3.3
Dump the data from ENVOX and Open databases which are on ENVOX
versions P2.x, P3.0, P3.2 and P3.3 as described in the steps below:
Step 1: Log into the ENVOX account as follows:
Username: ENVOX
Password: your_password
The DCL prompt appears.
Step 2: If you have not already done so, determine the structure of
your databases and collect the statistics generated, as
described in subsection 5.2.1.
Step 3: Dump the data to tape by entering the following command at
the DCL prompt:
$ mcr envox$application:pdx.exe df ”SERVER””DB””sa_password” tapedrive:
See The System Manager’s Guide to ENVOXr Configuration
Software , SM1.0:SW3151, for P4.0 for more details on the
PDX utility.
Step 4: Repeat Step 3 for every ENVOX and Open database, using a
separate tape for each database.
Once you have dumped all of your data from databases, you may
complete the upgrade. Proceed to subsection 5.2.3.
5