Installation manual

Installing ENVOX Software

F Section 4

Installin g and Upgrading ENVOX

Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)

For new installations, the ENVOX forms password is set to

password. We recommend that you change the password to

one of your own and keep the new password safe.

Note ...

This completes the ENVOX client-server installation.

4.4 Installing ENVOX Software on Client-Only Systems

The following section describes how to install ENVOX software for a

client-only system.

Step 1: If you are not logged into the system manager’s account, log

in by entering the user name SYSTEM and the password at

the prompts:

Username: SYSTEM

Password: your_password

The DCL prompt appears.

Step 2: If you have not already read the installation script from the

installation media as described in the SYBASE installation

procedure (subsection 3.5), insert and make ready the media,

and read the script by entering the following command at the

DCL prompt:

$ backup tapedrive:syb_envox_inst.a/sav *.*/new

where tapedrive is the name of your tapedrive if installing

from tape, or the full directory pathname where the savesets

are stored if installing from disk.

Step 3: Start the installation script by entering the following command

at the DCL prompt:

$ run sybase_envox_install

The screen clears and the following display appears:

Checking system

Please wait...