Installation manual

Installing ENVOX Software

F Section 4

Installin g and Upgrading ENVOX

Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)

Step 4: Move the cursor to INSTALL ENVOX and press Return.

The following display appears:

ENVOX Client-Server Installation

1)ENVOX System Disk = SYS$SYSDEVICE

2)ENVOX Log Disk = SYS$SYSDEVICE

3)ENVOX Database Disk = USER$1

4)ENVOX Account UIC code = 17,1011

5)ENVOXSUPPORT Account UIC code = 17,1012

6)Create ENVOXDB = Y

7)Tape device =

ENTER QUIT

Step 5: For menu item 1), enter the name of the disk which will

contain the main ENVOX directory structure.

Step 6: For menu item 2), enter the name of the disk which will

contain the ENVOX transaction log. The transaction log

requires 46,000 blocks of disk space.

Step 7: For menu item 3), enter the name of the disk which will

contain the ENVOX database device. The ENVOX database

device requires 250,000 blocks of disk space.

Step 8: For menu item 4), enter the UIC code for the ENVOX

account. The UIC code must be unique and of the form,

group, member, where group and member are OCTAL

numeric numbers in the range: group=[0 to 3776] and

member=[0 to177776]. A UIC default value of 17,1011 is

recommended and places the ENVOX account in the same

group as the CHIP account.

Step 9: For menu item 5), enter the UIC code for the

ENVOXSUPPORT account. The UIC code must be unique

and of the form, group, member, where group and member

are OCTAL numeric numbers in the range: group=[0 to 3776]

member=[0 to 177776]. A UIC default value of 17,1012 is

recommended and places the ENVOXSUPPORT account in

the same group as the CHIP account.

Step 10: For menu item 6), enter Y if you want to create ENVOXDB

during installation.

If you enter N, the ENVOXDB will not be created and the

installation time required to create the ENVOX databases will

be reduced to about 30 minutes to 1 hour.