Installation manual

Section 4 F Installing ENVOX Software
42
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
4.3 Installing ENVOX Software on Client-Server Systems
The following section describes how to install ENVOX software for a
client-server system.
Step 1: If you are not logged into the system manager’s account, log
in by entering the user name SYSTEM and the password at
the prompts:
Username: SYSTEM
Password: password
The DCL prompt appears.
Step 2: If you have not already read the installation script from the
installation media as described in the SYBASE installation
procedure (subsection 3.3), insert and make ready the media,
and read the script by entering the following command at the
DCL prompt:
$ backup tapedrive:syb_envox_inst.a/sav *.*/new
where tapedrive is the name of your tapedrive if installing
from tape, or the full directory pathname where the savesets
are stored if installing from disk.
Step 3: Start the installation script by entering the following command
at the DCL prompt:
$ run sybase_envox_install
The screen clears and the following display appears:
Checking system
Please wait...
The following display appears:
Choose whether to install or de-install ENVOX
Move cursor to item and press <CR>.
INSTALL ENVOX
DE-INSTALL SYBASE and ENVOX
QUIT
4