Installation manual

Section 3 F Installing SYBASE Software
34
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
3.5 Installing SYBASE Software on Client-Only Systems
The following section describes how to install SYBASE software for a
client-only system.
Step 1: If you are not logged into the system manager’s account, log
in by entering the user name SYSTEM and the password at
the prompts:
Username: SYSTEM
Password: your_password
The DCL prompt appears.
Step 2: Insert and make ready the installation media, and read the
installation script from the media by entering the following
command at the DCL prompt:
$ backup tapedrive:syb_envox_inst.a/sav *.*/new
where tapedrive is the name of your tapedrive if installing
from tape, or the full directory pathname where the savesets
are stored if installing from disk.
Step 3: Start the installation script by entering the following command
at the DCL prompt:
$ run sybase_envox_install
The screen clears and the following display appears:
Checking system
Please wait...
If there are no errors, the following display appears:
Choose whether to install or de-install SYBASE and
ENVOX
Move cursor to item and press <CR>.
INSTALL SYBASE
INSTALL ENVOX
DE-INSTALL SYBASE and ENVOX
QUIT
Step 4: Move the cursor to INSTALL SYBASE and press Return.
The following display appears:
3