Installation manual

Installing SYBASE Software

F Section 3

Installin g and Upgrading ENVOX

Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)

Figure 3-Table 3

3 Installing SYBASE Software

This section explains how to install SYBASE software on a Micro VAX

3100 computer, a VAXstation 3100, a VAXstation 4000 and the

AlphaStation 200 series. This section also in cludes information about

reco vering from errors. See Appendix A for the meaning of error

messages. See Appendix C for log files of a typical installation. In

addition, section 8 provides instructions for backing up and restoring the

system’s disks, and de-installing the ENVOX and SYBASE software.

3.1 New System Installation Method

Before installing ENVOX software for the first time on an OpenVMS

system, ensure that the hardware is properly installed and the system is

operationally tested. Then, follow the installation procedure sequence as

shown in Figure 3-1.

Install SYBASE Software

Install ENVOX

Software

Install CHIP Software

Tailor VMS for CHIP

System Backup

End

See Section 3

See Section 4

See Section 8

See CHIP

Installation

Manual

Start

System Backup

See Section 8

ure

-1. S