Installation manual

13
System Requirements
F Section 2
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
2.4 Software Requirements
ENVOX software, version P4.0, requires an OpenVMS operating system,
DECnet, CHIP software, SYBASE SQL (Data) Server, APT, and Open
Client software, and DECwindows Motif software. Table 2-2 lists the
required software versions.
Table 2-2. Software Version Levels
Software Revision
OpenVMS 7.1
(3)
DECwindows Motif(VAX) 1.2--3
DECwindows Motif(AXP) 1.2--4
CHIP DEC OpenVMS VAX
(1)
P5.0 or later
CHIP DEC OpenVMS AXP
(1)
P5.0 or later
SYBASE SQL Server 10.0.2.6
(2)
SYBASE APT 5.3
(2)
SYBASE Open Client 10.0.4
ENVOX
R
software
P4.0
1. CHIP kernel or CHIP by point size. The CHIP tape contains Kermit software
2. This version of the Sybase software shipped with ENVOX P4.0 includes Sybase software
fixes EBF6203 for the VAX platform and EBF6202 for the AXP system. If you use your
software instead, be sure that these fixes are included.
3. This version of VMS requires ECO kit VAXY2K01_071 for the VAX platform and ECO kits
ALPY2K01_071, ALPSCSI02_71, and ALPMOTF03_U4012 for the AXP platform.
2.5 Highway Interface
Downloading configurations and performing diagnostics requires a
Type DH6215 Computer/Highway Interface Package (CHIP DEC
OpenVMS VAX) or a Type DH6219 Computer/Highway Interface Package
(CHIP DEC OpenVMS AXP). The CHIP software interfaces to the
PROVOX
R
highway system using one of the following:
J Type DH6009 Serial Interface Unit (SIU) with the appropriate highway
interface card — on a network using DECnet — VAX only
J Type DH6032 Highway Data Link (HDL), if the CHIP version is P4.3 or
later — on a network using TCP/IP — AXP or VAX
J Type DC7611 Data Highway Interface (DHI) card for a PROVOX Data
Highway — VAX only
J Type DC7711 Data Highway Interface II (DHI II) card for a PROVOX
Highway II — VAX only
J Type DH6021 Network Interface Unit (NIU) — on a network using
DECnet — AXP or VAX
2