Installation manual

Appendix A F Error Messages
164
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
Description The UIC must be in the form: group, member, where they are
OCTAL numeric values in the range:
group = [0 to 37776] and member = [0 to 177776].
Message Value is not a valid number.
Description An illegal value has been entered for the number of CDOS users.
Enter a value within the range [1 to 32].
Message server_name already in use.
Description The server name is being used by a SYBASE server and is
entered in the interfaces file.
Message Warning - not possible to validate the port
number
Please update the interfaces file after
installation.
Description There is no TCP/IP software or the software is not running, so the
port number cannot be validated. The installation will proceed but
no entry will be made in the SYBASE interfaces file. You will have
to edit this file manually.
Message Warning - Unable to determine host tcp/ip
address
Please update the interfaces file after
installation.
Description There is no TCP/IP software or the software is not running, so the
TCP/IP address of host machine cannot be resolved. The
installation will proceed but no entry will be made in the SYBASE
interfaces file. You will have to edit this file manually.
Message There is not a cdos account on this machine.
Description Use the HP System Administrator Manager’s (SAM) to create a
CDOS account.
Message The chip group does not contain the cdos
account.
Description Use the HP System Administrator Manager’s (SAM) to add the
CDOS account into the CHIP group.
A