Installation manual

155
Error Messages
F Appendix A
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
Message tape_device must be terminated with a :
Description The entered tape device must be terminated with a colon.
Message The sybase logical, SYBASE_DEVICE is not defined
Description Verify that either sys$sysroot:[sysmgr]sybase_disk_logicals.com exists or
sys$common:[sysmgr]sybase_disk_logicals.com exists.
Message The sybase logical, SYBASE_MASTER_DEVICE is not
defined.
Description Verify that either sys$sysroot:[sysmgr]sybase_disk_logicals.com exists or
sys$common:[sysmgr]sybase_disk_logicals.com exists.
Message sys$manager:sybase_vms_resources.dat file is missing
Description The installation process was unable to locate the above temporary file
which is created by the installation process and is used to validate the
system parameters.
Message Please increase sysgen param to xxx
Message Please increase pagefile to xxx
Message Please increase ncp logical links to xxx
Description The installation process determined that the above system parameter
needs to be increased. Refer to section 10 for help on changing system
parameters.
Message The parameters in sys$common:[sysmgr]inst_file.out are
incorrect
Description The installation process has determined that the parameters in the above
file are incorrect. Please keep this file.
A