Installation manual

145
Installing and Upgrading CDOS for Control Desktop
F Section 12
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
$ startdd
This command produces output to the diagnostic daemon log file. The file
name is given in the diagnostic daemon configuration file (described in
subsection 12.11.10). The default name is cdos_system:[cdos]dd.log. If
the diagnostic daemon has started successfully, the following line is seen
at the end of the diagnostic daemon log file.
date, time Initialisation complete
12.11.7 Stopping the Diagnostic Daemon
To stop the diagnostic daemon, log into the cdos account and enter the
following at the prompt:
$ stopdd
12.11.8 Starting the Devrev Daemon
To start the Devrev daemon, log into the cdos account and enter the
following at the prompt:
$ startdr
This command produces output to the devrev daemon log file. The file
name is given in the devrev daemon configuration file (described in
subsection 12.11.10). The default name is cdos_system:[cdos]dr.log. If
the devrev daemon has started successfully, the following line is seen at
the end of the devrev daemon log file.
date, time Initialisation complete
12.11.9 Stopping the Devrev Daemon
To stop the task daemon, log into the cdos account and enter the
following at the prompt:
$ stopdr
12.11.10 CDOS Configuration File
The CDOS server needs a configuration file for startup. The installation
creates a configuration file called cdos_server_name.cfg in the
application directory. Therefore, for the CDOS server named, CDOS, the
file is named cdos_system:[cdos.application]cdos.cfg. The file has the
following format:
12