Installation manual

Section 12 F Installing and Upgrading CDOS for Control Desktop
142
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
12.10.2 Routing using MULTINET
To determine whether a default gateway has been configured on a
system installed with MULTINET, enter the following:
Step 1: If you are not logged into the systems manager’s account, log
in by entering the user name SYSTEM and your password, at
the prompt.
Username: System
Password: your_password
The DCL prompt appears.
Step 2: Enter the following command at the DCL prompt:
$ multinet configure/menu
A menu is displayed.
Step 3: Choose Configure Global Parameters from the menu.
Another menu is displayed.
Step 4: Choose Modify Global Parameters from the menu.
The system provides a display similar to the following:
Host Name janus.leicstc.eur.frco.com
NetWare Host Name
Default Route gateway ip address
Domain Nameservers 127.0.0.1
Nameserver Retrans
Nameserver Retry
IP Cluster Aliases
Cluster Service Names
Cluster Service Address
Timezone GMT
Timezone Rules BRITAIN
Local Domain
If an entry does not exist in the Default Route row, then a
default gateway has not been configured. Perform the next
steps to configure a default gateway:
Step 5: Enter your gateway ip address into the above menu and
enter Control Z to return to the top level menu.
Step 6: Select the menu item Save Changes and Return to
Previous Menu.
Step 7: Enter Exit Menu to return to the DCL prompt.
12