Installation manual

139

Installing and Upgrading CDOS for Control Desktop

F Section 12

Installing and Upgrading ENVOX

Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)

Do you want to grant world read access to

non-privileged uses: NO

o Configure Interfaces

Core environment ==>Interfaces

*Do you want to configure SE0 YES

Enter unqualified host name: ORANGE

Enter Internet address for ORANGE: 129.36.21.146

Enter Internet network mask for ORANGE: 255.255.255.0

Enter broadcast mask for ORANGE[129.36.21.255] <CR>

o Configure Time Zone

Core environment ==> Time Zone

Enter your choice: g (Greenwich)

o Configure Portmapper

Server components ==>portmapper

Enter configuration option: 8

o Configure Optional components ==>Configure SRI QIO

Interface

Enter configuration option: 1 (Enable service on this

node)

Exit configuration procedure

Step 6: Reboot your system to pick up the UCX parameters by

entering:

$ reboot

Step 7: Verify that UCX is running and TCP/IP is operational by

entering:

$ show system

The process UCX$inet_ACP should be displayed.

$ UCX ping/number_of_packets = 1 orange