Installation manual

Section 12 F Installing and Upgrading CDOS for Control Desktop
134
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
Checking menu options
Please wait....
If there are no errors, the following display appears:
Move cursor to item and press <CR>
PROCEED WITH DE-INSTALLATION
QUIT
WARNING: Proceeding will cause a total
de-installation of CDOS. Are you sure you want
to proceed.
Step 3: Move the cursor to PROCEED WITH DE-INSTALLATION and
press Return to continue with de-installation.
If there are no errors, the installation continues to completion.
During the de-installation, the following display appears:
start of inst_cdos.com
Deleting existing cdos files...
cdos de-installation completed successfully on date, time
The CDOS software has now been removed from the DEC VAX or
DEC AXP platform.
Step 4: Re-tune the Sybase server to support the new number of
connections to the server. For tuning instructions, see
subsection, Tuning the Sybase Server, in subsection NO TAG.
When you have finished re-tuning the server, the de-installation process
is complete.
12.9 Troubleshooting
This subsection provides information about installing TCP/IP and
specifying servers in the interface file.
12.9.1 TCP/IP Installation Guide
The steps described below to install Multinet and UCX on DEC VAX and
DEC AXP platforms are provided as a guide only. Multinet and UCX
should always be installed and configured using the vendor-supplied
installation and configuration manuals.
12