Installation manual

Section 12 F Installing and Upgrading CDOS for Control Desktop
130
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
start of inst_cdos.com
----------------------
Deleting existing cdos files...
Installing CDOS files...
Installing cdos images
start cdos server
Job CDOS_STARTUP (queue SYS$BATCH), entry 3) started
on SYS$BATCH
checking for errors
cdos install completed successfully on 26-FEB-1998
14:39:02.34
Step 7: Login as user Sybase and re-tune the Sybase dataserver by
entering the commands:
$ set def [sybase.install]
$ @sybase_tune.com
12.7 Upgrading ENVOX Databases
ENVOX P4.0 databases must be upgraded to add certain tables and
procedures before they can be used with Control Desktop P2.0. However,
you may or may not have to use the procedure below to upgrade the
databases, depending on:
J If you have been using Control Desktop P1.0 with ENVOX P3.4
databases, the databases are automatically upgraded for Control
Desktop P2.0 when you upgrade to ENVOX P4.0. You do not have to
perform the procedure.
J If you have never used Control Desktop with your ENVOX databases,
the databases must be upgraded. They are not upgraded as part of a
CDOS installation. You must perform the procedure.
J If you added ENVOX databases after Installing or upgrading to CDOS
P2.0 and you wish to use these databases with Control Desktop, you
must upgrade these databases by performing the procedure.
During CDOS P2.0 installation, you selected the Sybase server or servers
to be accessible through CDOS. The ENVOX databases on these servers
are the ones which you can upgrade. You may upgrade all or some of the
databases.
To upgrade an ENVOX database for use with Control Desktop, log into
your Control Desktop on your PC, using the ENVOX username and
password that you normally use to log into ENVOX forms, and:
Step 1: Select the database from the System Navigator window.
12