Installation manual

Section 12 F Installing and Upgrading CDOS for Control Desktop

126

Installing and Upgrading ENVOX

Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)

Identify Sybase Servers to be accessed via CDOS

Servers from interfaces file Servers to be

accessed via CDOS

1) SYBASE

ENTER QUIT

Use <CR> to move server to/from CDOS server list

Use left & right arrows to move between lists

Use up & down arrows to move within lists

The Sybase servers displayed in the two lists will be dependent

on the contents of your interfaces file and whether or not this

installation is a re-installation of CDOS.

Note ...

Step 13: Select the Sybase server or servers to be accessed through

CDOS by using the arrow keys to highlight the server in the

left hand list and pressing Return. The server is moved to the

right hand list so that is accessible via CDOS. The lists will

scroll if there are more servers than can be displayed on the

screen at the same time.

Step 14: Move the cursor to ENTER using the left or right arrow key

and press Return to continue the installation.

The following display appears:

Options validated OK

Move cursor to item and press <CR>

PROCEED WITH INSTALLATION

MODIFY OPTIONS

QUIT

Step 15: Move the cursor to PROCEED WITH INSTALLATION and

press Return to continue with the installation.