Installation manual

Section 12 F Installing and Upgrading CDOS for Control Desktop

124

Installing and Upgrading ENVOX

Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)

Choose whether to install or de-install CDOS.

Move cursor to item and press <CR>.

INSTALL CDOS

DE-INSTALL CDOS

QUIT

Step 4: Move the cursor to INSTALL CDOS and press Return.

The following display appears:

CDOS Installation

-----------------

1) CDOS System Disk = USER$1

2) CDOS Automatic Startup = Y

3) CDOS account UIC code = 17,2010

4) CDOS server name = CDOS

5) TCP/IP Software = M

6) CDOS port number =7010

7) Tape Device =

ENTER QUIT

Step 5: For menu item 1), enter the name of the disk which will contain

the main CDOS directory structure.

Step 6: For menu item 2), enter Y to add the CDOS startup

commands to the FISHER_STARTUP.COM file, or if this file

does not exist, the commands are added to the

SYSTARTUP_VIS.COM file.

If the answer N is given, none of the required CDOS logicals

are included in the startup file, and the CDOS server does not

start automatically when the system is rebooted.

When the CDOS Automatic Startup option is set to Y, there will

be a time following a reboot when the logicals required for

SYBASE, ENVOX and CDOS are not yet defined. For this

reason, a delay of two minutes is recommended before

attempting to log onto VMS following a reboot.

Note ...