Installation manual

Section 12 F Installing and Upgrading CDOS for Control Desktop
120
Installing and Upgrading ENVOX r Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)
12.3.4 TCP/IP Entries for the Servers
The CDOS installation automatically creates an entry in the interfaces file
for the CDOS server and configures a TCP/IP entry for it. The entry for
the SYBASE server can be optionally added during the ENVOX P4.0
installation. If the entry does not exist, it must be manually updated to add
a TCP/IP entry. The update must be done after TCP/IP has been
successfully installed and configured.
Updating the Sybase server entry is achieved by editing the file,
sybase_system:[sybase]interfaces, and adding a TCP/IP entry for each
Sybase server to be accessed by Control Desktop. The Sybase server
should be restarted each time changes to the interfaces file are
completed.
Figure 12-1 is an example of the interfaces file after CDOS has been
installed and the appropriate lines added for the Sybase server. The
highlighted 2nd and 4th lines are the lines which must be manually added
if they are missing.
The example shows an entry for a Sybase server called SYBASE on
node PAINTD with a TCP/IP address of 129.76.21.146 and port number
of 2025. You should substitute the server name and TCP/IP address of
your host machine. If the port number is already in use, choose another
one.
SYB
A
SE 1 5
query decnet dec-ether PAINTD 200
query tcp ether 129.76.21.146 2025
master decnet dec-ether PAINTD 200
master tcp ether 129.76.21.146 2025
debug decnet dec-ether PAINTD 200
SYB_BACKUP 1 5
query decnet dec-ether PAINTD 200
master decnet dec-ether PAINTD 200
CDOS 1 5
query tcp ether 129.76.21.146 7010
master tcp ether 129.76.21.146 7010
Figure 12-1. Example of a TCP/IP Entry
12