Installation manual

Backing Up, Restoring, and De-Installing Software

F Section 8

Installin g and Upgrading ENVOX

Configuration Software on DEC VAX and DEC AXP Systems (Revision B — May 1998)

Step 3: A message saying that volume labels do not match may

appear along with options for overwriting. If they do, select

overwrite to continue the backup proce ss.

The process can take from 20 minutes to 2 hours, depending on

the amount of data on the disk. If the data requires more than

one tape (multi-volume ), the system rewinds the curren t tape and

asks you to install another tape.

Step 4: When the backup is completed, the DCL prompt reappears

and the tape automatically unloads. Remove and label the

tape.

Step 5: A prompt asks if you want to back up another disk. During the

installation of SYBASE, data is placed on the second disk, so

you should back up that disk also.

Insert a new tape for backing up the second disk. Enter Y and

press Return. Then, repeat Step 2 and Step 4, using the

appropriate names for the systemdisk and saveset .

Step 6: When you have backed up b oth disks, press the halt bu tton

(at the rear of the computer). When the console mode prompt

(

>>>) appears, reboot the system by entering:

>>> BOOT systemdisk

where systemdisk is the name of your system disk.

Backup of the system is complete.