User manual
SVA026 Netcom 2 User Manual ver5
44
7.20EmailAlerts/Setup/EmailAlerts
Figure 7.23
In this screen the user can enter the email addresses of the individual/groups emails. Any
changes made to this screen will affect the Email Alerts and SNMP (receivers) pages.
The SMTP server address must be entered and the Enable check box must be selected for
e-mails. The delay timer will start when an e-mail able event occurs; if the event clears
before the timer expires an email will NOT be sent.
The Test All button on the bottom right will send a test email to all email
addresses added to the screen.