User manual

SVA026 Netcom 2 User Manual ver5
41
Figure 7.20
In figure 7.20 the user has the ability to input 10 trap receivers per event category. The
trap community string must be entered for messages to be transmitted. The categories are
selected in figure one of this section and an event can only be used in one category. After
all receivers are entered, enabled and saved a test call can be made by selecting the Test
All button. The delay timer will start when an e-mail able event occurs; if the event clears
before the timer expires an email will NOT be sent.
When the user selects the word Configure Event Text they will be directed to
figure 7.21.