User manual

SVA026 Netcom 2 User Manual ver5
37
7.16SNMPRec’rs/SNMPReceiv ersPage
Figure 7.16
The Setup/SNMP Rec’rs page is used to set up the community receivers. The IP
address, community string and access permissions are specified here for up to ten
Network Management Stations. Any machine which will be required to receive SNMP
traps sent from this unit must be entered here. This page will change be changed if
entries are made on the Event Notification page.
Receive traps Enabled setting allows the specified NMS to receive the units standard
range of traps. The Test All function will allow the user to test the setup.