User manual
SVA026 Netcom 2 User Manual ver5
27
7.7NominalValues/UPSNominalValuesPage
Figure 7.7
The UPS/Nominal Values page is where the UPS nominal values can be
changed. This information can be found in the UPS Owners/Technical for nominal
values. If these values are not set to the current UPS values the UPS Status values will
not read correctly and the bar graphs will not indicate proper voltage.
When the words Change Nominal Values is selected the user is directed to
figure 7.8. The UPS nominal values are entered into this screen and saved.
*The battery voltage is a preset value and can not be changed.*