User manual

SVA026 Netcom 2 User Manual ver5
22
Under the default, select UPS ->Status this will set the status page to default. The user
can also select the time before the Netcom2 times out by selecting the User Session
Timeout: drop down.
If the Input Volts, Output volts, or Output load is any color other than green
the values are out of limits. This can be corrected by entering the correct values in the
Nominal Values page or the values are out of the UPS’s operating range.
If the Input Volts, Output volts, or Output load graphs are to the max this also
is an indication of incorrect values entered in the Nominal Values page.

