Technical data

means that the CTF object at the remote server is protected by a user name

and password. Either you have failed to supply the user name and password

with the START command, or you have speciﬁed them incorrectly.

• The message:

%SYSTEM-F-REJECT, Connect to network object rejected

usually means that you have tried to trace a remote server that has been

conﬁgured as a Phase IV router; CTF is supported only on servers that

have been conﬁgured as DECnet/OSI for VMS routers. Use the NETTRACE

facility to trace remote Phase IV servers. See the Problem Solving Guide for

the product you are tracing for information on how to use NETTRACE.

3–14 Using CTF