Owner`s manual

K
KA65A processor
general information, 1–1 to 1–7
installing, 5–1 to 5–5
LEDs, B–1 to B–7
power requirement, 1–1
upgrade paths, 1–2
verification, 6–1 to 6–21
L
LEDs
processor error, B–1 to B–7
T2019 power regulator module,
4–9
M
Module return, 2–10
P
Patching EEPROM, 6–10 to 6–13
Power inhibit cable, 3–1
Power regulator module, 1–3
Power required by KA65A, 1–1
Power-up, 6–4
Preparation for installation, 2–1 to
2–11
Printout of system parameters, 2–4
to 2–5, 6–16
Processor
configuration rules, A–2
installation, 4–1 to 4–9
LEDs, B–1 to B–7
verification, 6–1 to 6–21
R
Removal of old modules, 2–8
Return of old modules, 2–10
S
SAVE EEPROM command, 2–2 to
2–3
Self-test
Self-test (Cont.)
at power-up, 6–6
examples, 6–6
line ETF, 6–7
line STF, 6–7
line XBI, 6–7
Serial number
system, 2–3
SET BOOT command, 6–8
SET POWER command, 6–8
options, 6–9
SET SYSTEM SERIAL command,
6–8
SHOW ALL command, 2–5, 6–17
SHOW FIELD command, 6–17
SHOW SYSTEM SERIAL command,
6–9
Site Management Guide, 2–5, 6–17
System power-up, 6–4
System serial number, 2–3, 6–8
System shutdown, 2–6
T
T2019
description, 4–2
installation, 4–8 to 4–9
LEDs, 4–9
TK50 tape drive, 2–2
TK70 tape drive, 2–2
U
UETP (User Environment Test
Package), 6–19
running the program, 6–19
UPDATE command, 6–8
Upgrades
VAX 6000 Model 200, 300, or 400
without +3.3V power, 1–3
VAX 6000 Model 300 or 400 with
+3.3V power, 1–3
VAX 6000 Model 500, 1–3
V
Index–2