Owner`s manual

Index
B
Battery backup
comparison of H9657-CX and -CU
upgrades, 1–5
Booting VAX/DS, 6–10
Boot primitives, 2–3, 6–12
Boot specifications, 2–3
Bus bar, 4–2
installation, 4–6 to 4–8
C
Compatibility issues, 2–9
Configuration rules
H9657-CX, 4–4 to 4–5
processor, A–2
vector processor, A–4
Console commands
INITIALIZE, 6–6
SAVE EEPROM, 6–16
SET BOOT, 6–8
SET POWER, 6–8, 6–9
SET SYSTEM SERIAL, 6–8
SHOW ALL, 6–17
SHOW FIELD, 6–16
SHOW SYSTEM SERIAL, 6–9
UPDATE, 6–8
Console parameters, 2–3
Console patches, 2–3
CPU
H9657-CX limitations, 1–5
D
Diagnostic patches, 2–3
Diagnostic Supervisor, 6–10 to 6–15
Door slug replacement, 6–21
DWMBA-A modules, 5–5
DWMBB-A modules, 5–5
E
EEPROM
copying contents, 2–2 to 2–3,
6–18
saving after installation, 6–18
saving before installation, 2–2
saving parameters, 6–18
setting parameters, 6–18
updating, 6–8
EVKAG/H (vector diagnostic), 6–14
to 6–15
EVSBA (standalone autosizer), 6–14
to 6–15
EVUCA program, 6–10 to 6–13
H
H7231-N battery backup, 1–5
H7236-A battery backup unit, 1–5
H7242 power inhibit cable, 3–1
H7242 power regulator, 1–5
H9657-CU upgrade kit, 1–3
compared with H9657-CX, 1–4
H9657-CX upgrade kit, 1–3
bus bar, 4–7
compared with H9657-CU, 1–4
configuration rules, 4–4 to 4–5
installation, 4–1 to 4–9
kit contents, 4–2 to 4–3
T2019 module, 4–8
I
Installation of KA65A modules, 5–1
to 5–5
Index–1