Owner`s manual

Example 6–8 (Cont.): System Parameters Printout
XBI E
1+ DWMBA/B (2107) 000A
2+ DEBNI (0118) 0100
4+ KDB50 (010E) 0F1C
6+ TKB70 (410B) 0304
Current Primary: 3
/NOENABLED-
/NOVECTOR_ENABLED-
/NOPRIMARY-
F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE #
.....A2A1........ILV
. . . . . 128 128 . . . . . . . . 256 Mb
/CONSOLE_LIMIT: 01000000
/INTERLEAVE:DEFAULT
/SCOPE /SPEED: 9600 /BREAK
English
XMI:D BI:4 08-00-2B-0B-8E-94
XMI:E BI:2 08-00-2B-15-7F-C3
DEFAULT /XMI:E /BI:4 DU0
For future troubleshooting and maintenance, record system parameters.
This step is especially important for single-processor systems and systems
that have a CD load device. Use hardcopy printout and save the printout
in two places: the maintenance envelope attached to the back door of the
cabinet and in your Site Management Guide.
SHOW FIELD
Enter the SHOW FIELD command at the console prompt. This display
includes the system serial number and power system, which are not
included in the SHOW ALL command.
SHOW ALL
Use the SHOW ALL command to record all other relevant information for
the system for future reference.
Verifying the System 6–17