Owner`s manual

6.5 Run EVUCA to Apply Current ROM Patches
(Mandatory)
You must run EVUCA to ensure that all modules are up to the
latest patch revision. Boot the VAX Diagnostic Supervisor
(VAX/DS), run the autosizer EVSBA, and load and run the
EVUCA program.
Example 6–4: EVUCA Program (Part 1)
>>> BOOT /XMI:D /R5:10 /BI:4 DU0
[The VAX Diagnostic Supervisor banner appears.]
DS> RUN EVSBA
DS> SELECT ALL
DS> SET TRACE
DS> RUN EVUCA
.. Program: EVUCA - VAX 6000 EEPROM Update Utility, revision 1.0, 5 tests,
at 00:05:57.61.
Testing: _KA0 _KA1
Booting secondary CPU 02.
Test 2: Load data from media
Data file? <EMUCA.BIN>
Searching for data file.
Data file loaded.
Looking for patch for CPU 01 - ROM 02.00 EEPROM 02.00.
Patch image is revision 02.01
Do you really want to apply this patch [(No), Yes] YES
Looking for patch for CPU 02 - ROM 02.00 EEPROM 02.00.
Patch image is revision 02.01
Do you really want to apply this patch [(No), Yes] YES
Test 3: Determine Typecodes Updated
Test 4: Update EEPROM data
Getting selectable boot primitives for CPU 01, ROM 02.00
6–10 VAX 6000: Installing Model 500 Processors