Owner`s manual

Chapter 5 Installing the KA65A Processor
5.1 Holding the KA65A Processor . . ...................... 5–2
5.2 Inserting the KA65A Processor Into an XMI Card Cage .... 5–4
Chapter 6 Verifying the System
6.1 Verification Overview . .............................. 6–2
6.2 Power Up the System. .............................. 6–4
6.3 Examine the Self-Test .............................. 6–6
6.4 Set System Parameters (Mandatory) ................... 6–8
6.5 Run EVUCA to Apply Current ROM Patches (Mandatory) . . 6–10
6.6 Run the VAX Vector Instruction Exerciser (Optional) . ..... 6–14
6.7 Print System Parameters ............................ 6–16
6.8 Save EEPROM to TK Tape (Optional) .................. 6–18
6.9 Verify System Under Operating System ................. 6–19
6.10 Change System Number Plate . . ...................... 6–20
Appendix A VAX 6000 Model 500 General Configuration Rules
A.1 General Configuration Rules . . . ...................... A–2
A.2 FV64A Vector Configuration Rules ..................... A–4
Appendix B Description of KA65A LEDs
B.1 Overview of KA65A LEDs ........................... B–2
B.2 Determining Failing Test from LEDs ................... B–4
B.3 KA65A Error LED . . . .............................. B–6
Index
iv