Owner`s manual

Example 2–3: Record System Parameters — SHOW ALL Command
>>> SHOW ALL
Type Rev ! Lists all system parameters,
1+ KA64A (8082) 000B ! beginning with the system
2+ KA64A (8082) 000B ! configuration
9+ MS62A (4001) 0002
A+ MS62A (4001) 0002
D+ DWMBA/A (2001) 0002
E+ DWMBA/A (2001) 0002
XBI D
1+ DWMBA/B (2107) 000A
2+ CIBCA-B (0108) 41C2
4+ DEBNA (410F) 0248
XBI E
1+ DWMBA/B (2107) 000A
2+ DEBNI (0118) 0100
4+ KDB50 (010E) 0F1C
6+ TBK70 (410B) 0307
Current Primary: 1 ! Shows the status of CPUs
/NOENABLED-
/NOVECTOR_ENABLED-
/NOPRIMARY-
! Shows the memory interleave
F E D C B A 9 8 7 6 5 4 3 2 1 0 NODE #
. . . . A2 A1 . . . . . . . . ILV
. . . . 32 32 . . . . . . . . 64 Mb
/INTERLEAVE:DEFAULT
/SCOPE /SPEED: 9600 /NOBREAK
English
XMI:D BI:4 08-00-2B-0B-8E-94
XMI:E BI:2 08-00-2B-15-7F-C3
DEFAULT /XMI:E /BI:4 DU0
>>>
At the console prompt, enter SHOW ALL.
If you have not selected one of the printing modes, use the Print Screen
key to print this screen.
NOTE: Store these two printouts in the Site Management Guide for later
reference.
Preparing for the Installation 2–5