User`s manual

5. After a few moments, set the lighting compensation to
“Off.” The image should not change.
6. Remove the mask fmm the inspected object. When you
do, the image should appear as shown in Figure 6.22.
7. To save the configuration, return to the Configuration
Menu. Use the Add or Insert option to create a new
configuration record, or use the Overwrite option to
update an existing configuration record.
Fgure 620 Dark object Wiih the Bight Area Not Covered
Ir~spected object
-~
t
“Normal” background
lominance
t
“Normal” background
luminance
In
Reflection or bright
area on object
Figure 6.21 Dark Object Wiihthe Bdght Area Covered
Figure 8.22 Dark Object Wiih Lighting Compensation Disabled
“Normal” background
lumtuauce
Inspected object
“Normal” backgrormd
luminance
Retlection or bright
/ area is ignored
6-25