User`s manual

Your Action Comments
Select the Conjiguration
option in the Main Menu.
To alter the background probe position parameter, use the
keys shown in Table 6.2:
Table 02
Altering Background Probe Position
Desired Result
I
Your Action
Hiqhliaht probe position parameter.
1 Press the 2 key.
Increment probe position by 0.4%.
Increment probe position by 4.0%.
Decrement probe position by 0.4%.
Press the 2 key or space bar.
Press the asterisk (7 key.
Press the backspace key.
Decrement probe position by 4.0%.
1 Press the ampersand (&) key.
Repeat the above steps as necessary, until the binarization
level and probe are positioned correctly for your
application. Then, press the ENTER key to send the new
parameter values to the SLS. When you do, the dashed
binarization level indicator becomes a solid line again.
Once you have determined the optimum positions for the
binarization level and background probe, you must enter
the corresponding values in the appropriate configuration
record (use the Overwrite option), then send that
configuration to the SLS. At that poinf the SLS becomes
operational using these values.
Configuring the SLS For Binary Analysis Functions
In order to set the relative background level correctly for
binary analysis functions, you should configure the SLS
according to the following procedure:
Select the Add option to When you select the Add option, the Configuration Screen
create a new configuration
record on the Configuration
appears on fie display.
Screen.
Enter an appropriate name
or description in the
Description field
6-20