User`s manual

binarization level, which indicates that it is currently
selected and can be changed.
Fgure 6.16 Binarlzdion and Probe Parameters in View image
I
Biuarization level
Background probe
Note: As soon as you change either parameter, the
binarization level symbol (horizontal line) changes to a
dashed line, as shown in Figure 6.17, below. This is a
reminder to press the ENTER key to validate the parameter
changes bv sending them to the SLS. When you press
&R, the solid iine reappears.
- .
Figure 0.17 Dashed Binariration Level Symbol
Bharization level indicator after
changing either parameter.
To alter the binarization level parameter, use the keys
shown in Table 6.1:
Table 6.1
Altering Binarization Level
-
Desired Result Your Action
Hiahliqht binarization level parameter. 1 Press the 1 kev.
Increment binarization level by I. Press the 1 key or space bar.
Increment binarization level by IO.
Decrement binarizatlon level by 1.
1 Press the asterisk (‘) key.
1 Press the backspace kev.
Decrement binarization level by 10.
1 Press the ampersand (8) key.
6-19