User`s manual

Figure 0.15 Binarkation Level indicator and Parameter
El
1-h-C
Blnarization
bject
Level indicator
-BackgFound prohe
indicator is fiush
with edge
I
1
II!
Exposure Time hsl: 11.0
Cycle Time hsl:3Q
q
q
•.u
f
/
1) Object size:
22.92
!I Object center: m
Bin&&ion level
Background probe
position
lm
q -/
Binary Object Siu
2) ea..
X = object center
When the probe position is set to a non-zero value, the
probe is visible in the View Image display, as shown in
Figure 6.14 (page 6-16). It detects the luminance level at
that position, and the binarization level automatically
adjusts to any luminance changes that the probe detects.
Visually, the binarization level indicator appears to be
“riding” the top of the background probe indicator.
-
Setting the Binarization and Probe Parameters
As shown in Figure 6.14 (page 6-16) and Figure 6.15,
above, the current settings of the binarization level and
background probe position parameters appear in the
bottom-center of the View Image display.
Figure 6.16, on page 619, shows these two parameters
close up. Note that the reverse video cursor highlights the
6-18