User`s manual

To decrement the highlighted value, press the
BACKSPACE key.
To send the altered values to the SLS, press the ENTER
key. In a moment, the efict of the altered values
appears in the View Image display.
Repeat steps 1 through 6, as necessary, until the small
“x’s” are correctly positioned on the first and last edges
of the inspected objects.
Once you have determined the optimum values for the edge
span and edge height parameters, using the View Image
display, you must enter them in the appropriate
configuration record (use the Overwrite option) and send
(or m-send) that configuration to the SJS. At that point, the
SLS becomes operational using these values.