User`s manual

Figure 5.4 Initial Configuration Screen (Part 2 of 2)
hart Linear Sensor
Conf igurat ion Screen
Version 2.08
Fill in the configuration screen. Press ESC when done. Fl for help.
Series B - ONLY
&x Lighting Corrpensation? No
Binarization Function Paraaeters
Binarization Level
(B - 255) 48
Background Probe Position (fl - 99.6) 23.5
Set Point tlethud Both set points for Result A
Invert Discrete Output B? No
Use Burst We? No
Use TiRed Burst Me fbquisition?
Burst Hode
Spacing
Lighting Compensation (Series 6 SLS Only)
This field asks whether you want to enable or disable the
automatic lighting compensation function in the SLS when
you download this configuration.
Use the SPACE BAR to select Yes or No.
If you select Yes, lighting compensation in the SLS remains
enabled (the default condition). If you select No, lighting
compensation in the SLS is disabled.
Refer to Disable Automatic Lighting Compensation on page
6-22 for a discussion of lighting compensation, and for
procedures showing how to use the “disable” feature in
special situations.
5-10