User`s manual

Configuration
_ Record
Configure Option
When you performed the procedures in Chapters 3 and 4,
you had a preview of the Configure Option and the
Configuration Menu and Configuration Screen. (If you
have not yet performed those procedures, it is
recommended that you do so before continuing with this
chapter and the remaining chapters.)
Thii chapter describes the configuration and support
options in the Configuration Menu and the data entry and
parameter fields in the Configuration Screen, and provides
the details for using these two “screens” to perform all of
the SLS configuration and support functions.
A configuration record contains all of the configuration
data that the SLS requires to perform a specified inspection
application. The CSS can store the conjiguration record in
memory under a descriptive name, and then download the
record to the SLS when required for the application.
(Note that the Send Configuration utility, described in
Appendix D, Send Configuration Utility, enables you to
download configuration records to the SLS using
application software other than the CSS.)
Configuration
Here is an outline of the main steps used to prepare any
Record Preparation
new conliguration record:
l Highlight and select the Configure Option in the Main
Menu.
l Highlight and select the Add or Insert option in the
Configuration Menu.
l Access each field in the Configuration Screen.
l Enter the appropriate data in each data entry field.
l Select the appropriate options in the other fields.
l Slop all fields that do not need to be changed.
l Save the completed configuration record.
You can use a similar set of steps to modify an existing
configuration record. The main difference is that you select
the Modify (or Overwrite) option instead of Add or Insert.