User`s manual

Move the moue cursor The help message scrolls to the last page.
over the Endprompt, then
click the mouse button.
Move the mouse cursor The help message scrolls back to the first page.
over the Home prompt, then
click the mouse button.
Move the mouse cursor
Refer to Figure 4.12.
over the down arrow in the
“elevator shaft.”
Figure 4.12 UsingtheDown Arro~inthe~ElevatorShaW
Smart Linear Sensor
klP
Version 2,b
Use PgUp, PgDn, Home, End, J, and t to uiew. Fi to search. ESC when done.
To highlight an option in the menu, use the Up Arrou t and Down Arrow 1
keys, (or the option’s initial letter) to move the reverse video bar
I”cursor”) over the desired option, Use the ENTER key to select the
highlighted option.
To print the contents of the current menu or help message, press the Print
Screen key or the Ctrl and P keys.
These are the Main Menu options:
Configure
The term “Configure” means setting up the SLS for a specific
application,
It includes seIecting and storing inspection function
-
Click the mouse button. The help message scrolls “down” one line. (If you press
and hold the mouse button, the page scrolls continuously.)
Move the cursor over the
up arrow in the “elevator
Figure 4.13 on page 4-13 shows the upper right corner of
shaft. ”
the Main Menu Help screen shown in Figure 4.12.
4-12