User`s manual

Your Action
Press the down arrow key.
Press the letter “S” key,
Press the up arrow key.
Press the ENTER key.
Use the following procedure to familiarize yourself with
the commands or keys listed above:
Comments
The reverse video cursor in the Main Menu moves down to
the View Image option.
The cursor moves down to the Statistical Process Control
option.
The cursor moves up to the Monitor option.
This selects the Monitor option. The Monitor Menu appears
on the screen, as shown in Figure 4.2. Note that the prompt
line now includes the ESC key.
Figure 4.2 Monitor Menu: Key Functions
Snart Linear Sensor
Monitor tlenu Version 2.N
I
Use 1 and t then press ENTER. ESC previous nenu. Fl help. F2 change port.
Press the ESC key.
Press the letter “C” key.
Press the Fl key.
Press the PgDn key.
Press the PgDn key again.
Press the PgUp key.
Press the End key.
-
cu
Vi
ll0
St
Pr
He
This returns to the Main Menu (Figure 4.1 on page 4-3.)
The cursor moves back up to the Configure option.
This selects a help message that describes the Main Menu
options. Refer to Figure 4.3 on page 4-5. Note that the
prompt line non’ containT a new set of key prompts.
The help message scrolls down to the next “page.” (A page
is 17 lines, the size of the help message box.)
When you press PgDn again, the next page appears (or the
last page, in some cases).
The help message scrolls back up to the previous page.
The help message scrolls down to the last page in the help
message.