User`s manual

-
Fgure 3.14 Monitoring Smart Sensor Screen
Smart Linear Sensor Bonitoring Smart Sensor
Version 2.86
Press Fi for help.
Press ESC when done.
Start Date: WlW1991
Start Time: 15:51:29
Result FI - First edge
lean: 28.81 Standard Deuiation: 0.87 Max: 28.23 Min: 27.58 Range: 8.73
Result B - Last edge
Hean: 82.37 Standard Deuiation: 8.97 Max: 82.69 Nin: 82.68 Range: 8.61
Switch Settings: Targeting Light Off
Setup 1 Teach Hode
Dark Object
Using remote configuration Level Triggered
Lighting compensation is On
Nomal Lighting
Exposure Time (~1: 12.2
Remote Configuration Enabled
Cycle Time Cns): 48 Output Normally Open
Triggers Processed: 921 of 921
High Resolution
Function: 1-D Spatial Measurement
The inspection results data appear as horizontal bars, and
statistics based on this data appear under each bar. Listed
below these displays are the selected analysis function, the
switch settings (operating parameters), and other data
related to the inspection operation.
Chapter 7, Monitor, provides full details of the Monitoring
Smart Sensor screen.
Press the ESC ky hvice. This causes the CSS to exit the Monitor option and return
to the Main Menu.
This completes the “Getting Started” procedure for using
the Monitor option.
Continue with Using the SPC Option, next.
3-13