User`s manual

-
Using the View
Image Option
Your Action
Comments
Press the “V” key to
highlight the View Image
option in the Main Menu.
Press the ENTER key.
-
The following procedure shows you how to select and use
the View Image option.
The View Image option displays images from the SLS
while the SLS operates using its current configuration. (In
this case, it is the “Locate Edges” example configuration
record, which you downloaded earlier using the Send
option).
Following an inspection cycle, the SLS sends image and
results data to the PC, and the CSS then displays these data
on the screen.
This causes the View Image Trigger Menu to appear, as
shown in Figure 3.10.
Figure 3.10 Vii Image Trigger Menu
I Uin I
I I
Han m
Sta Keyboard Trigger
Pro Externa 1 Trigger
He1 Keyboard 1 External Trigger
I hi I
_-
Verify that the cursor is
highlighting “Automatic
Trigger,” then press the
ENTER key.
When you press the ENTER key, the SLS begins acquiring
images and sending image and results data to the PC. When
the Aiming Target is properly positioned (as shown in
Figure 3.1, page 3-2). the View Image display appears as
shown in Figure 3.11 on page 3-10.
3-9