User`s manual

Preparing an SLS Use the following procedure to prepare an example
Configuration
configuration and send it to the SLS. At this point, your
SLS should be staged as indicated above, powered up, and
connected to the PC.
Your Action
Comments
Verify that the reverse video The Configure option enables you to create SLS
CUTSOT is highlighting the
“Configure” option in the
configuration records.
Main Menu.
Press the ENTER key to
When you press the ENTER key, the Configuration Menu
select the Configure option. appears on the screen, as shown in Figure 3.3.
Figure3.3 Configuration Menu
Smart Linear Sensor Configuration Henu Uersion 2.88
m Insert Delete flodify Overwrite Send Report View Image Utilities
Use + and + for options. Use 1, t, PgUp, PgDn, Howe, and End for records.
Press EWfER to run option. ESC Main knu. Fl for help. F2 change port.
Verify that the CUTSOT is
highlighting the ‘Add”
The Add option enables you to add a new configuration
option in the Configuration
record to the Configuration Menu.
Menu.
3-4