User`s manual

Error Messages
Example 3: Type sendconf -p2 -d“Object Length”
<Enter>
This causes the utility to download the “Object Width”
configuration record to the SLS attached to the COM2 port.
Example 4: Type sendconf -ASLS -d“Object Length”
-pl <Enter>
This causes the utility to download the “Object Width”
configuration record to the SLS attached to the COMI poh
One of the following error messages may appear if the send
operation is unsuccessfuul:
l error:
l error:
l error.
l error:
l error:
l error:
0 error
* error:
0
error:
0
error:
l error:
0
error:
@error:
l error
invalid directory
rf error
record was not found
error while sending
cannot initialize communications
cannot open the program configuration file
specified file name is too large
no file name specified
description is too large
missing description
path name is too large
missing directory
invalid port number, 1 - 4 are valid
missing description, use -11
Other Messages
l “configname” successfully sent.
D-3