User`s manual

-
Note the two alignment
keys on the 4-pin
connector
Refer to Appendix A, RS-232 Cable Connections, for
pinout information.
Carefully align the 4-pin
connector with J3 on the
SLS.
Refer to Figure 2.1, below.
Figure 2.1
Connecting the Cable to 53
Attach the connector to 53,
and tighten the locking
ring.
This completes the cable connection to J3.
If your PC has a g-pin
serial connector, attach the
g-to-25 pin adapter to the
communication cable.
This step applies only to IBM-AT or compatible PC’s
Attach the connector to the
This completes the cable connection to the PC.
appropriate serial port on
_-
the PC.
2-3