User`s manual

-.
Default SPC Setup Selection
When you highlight the “Default SPC setup selection”
field, the Default SPC Setup Menu appears, as shown in
Figure 9.3.
Fgure 9.3 Defautt SPC Setup Menu
SPC Setup Menu
Chart Selection and Setup Menu
Short SPC Menu MN Only)
Short SPC Setup Menu
Long SPC Setup Menu
This menu enables you to select a default setup menu to
appear on the display whenever you select the Statistical
Process control (SPC) option in the Main Menu. Your
choice of default setup menu should be the one that you
expect to use most often for SPC operations. (Refer to
Chapter 8, Statistical Process Control Option, for complete
details about SPC operations.)
Here are the default setup menu options:
SPC Setup Menu: If you select this default option, the
SPC Setup menu, shown in Figure 9.4, page 9-9, appears
on the display when you select the SPC option. You must
select one of the four setup menus from the SPC Setup
Menu.
Chart Selection and Setup Menu: If you select this
option, the Chart Selection and Setup Menu appears on the
display when you select the SPC option.
The chart menu enables you to select SPC operations
directly, without having to make entries on a setup screen
first.
-
9-8