User`s manual

appear whenever you select a “new” setup screen using the
“Add” or ‘Tnsert” option.
Number of Subgroups
Enter into this field the number of subgroups that you want
the CSS to use as the basis for the chart boundary
calculation.
Number of Inspections per Subgroup
Enter into this field the number of inspections (data points)
that you want in each subgroup.
Save Statistics When Exiting SPC?
In this field, select Yes if you want the CSS to save the SPC
statistics accumulated during the current SPC operation.
Otherwise, select No.
Use Saved Statistics When Starting SPC?
In this field, select Yes if you want the CSS to use statistics
saved from previous SPC operations as the statistical basis
when starting a new SPC operation. Otherwise, select No.
General Setup
The “General Setup” section contains three fields that apply
to all SLS operations.
Color Monitor (Yes/No)
In this field, select Yes if you are using a color monitor, or
No if you arc using a monochrome monitor.
Graphics Mode
When you highlight this field, the Graphics Mode Selection
Menu appears as shown in Figure 9.2 on page 9-6.
9-5