User`s manual

reports:
the Configuration Report, the Monitor Report, and
the four SPC reports.
Communication Setup
This section consists of three fields that specify certain
communication parameters, as follows:
Default Communication Port Number
This field specifies the port to which an SL.S must be
connected in order to use all of the CSS options. If the
current default setting is incorrect for your application,
enter a different port number (1 through 4 are valid).
Number of Tries Before Error
This field specifies the maximum number of
communication tries that the CSS performs before
reporting a communication error of a “no response”
condition. (Numbers 1 through 5 are valid.)
Number of Seconds Before Timeout
This field specifies the number of seconds that you want
the CSS to wait before retrying a communication with the
SJLS after the SLS failed to respond to the previous
communication attempt. (Numbers 1 through 5 are valid.)
Multiple Port Setup
If your application uses more than one SLS, and/or requires
port address/port interrupt (IRQ) numbers other than the
default numbem appearing on the screen, make the
appropriate entries in this section.
Refer to your communication adapter reference manual to
determine the appropriate port addresses and/or port IRQ
numbers.
9-3