User`s manual

Program Configuration Option
The function of the Program Configuration option is to
configure the CSS according to your hardware setup and
other application requirements.
More specifically, you can use the Program Configuration
option to define the following hardware, communication,
and SPC application parameters:
l Enter a name and address header for the configuration,
monitor, and SPC reports.
l Define the default communication port and the
communication error procedure.
l Defoe a multiple communication port setup.
l Select parameters for automatic SPC setup operations.
l Select graphic display modes.
This chapter provides the details for using the Program
Configuration Screen, which contains the data entry fields
for the setup functions listed above.
Program
Configuration Screen
To select the Program Configuration Screen, return to the
Main Menu, then highlight and select the Program
Configuration option. When you do, the Program
Configuration Screen appears on the display. Figure 9.1, on
page 9-2, shows the entire screen; however, you will see
only the top two-thirds initially. (To see the remainder,
press the PgDn key.)
Note that the Program Configuration Screen contains
several sections. The remainder of this chapter describes
each of these sections.