User`s manual

l Display adapter: A graphics display adapter and
monitor (to support the View Image and Statistical
Process Control options). The CSS supports hercules,
CGA, EGA, and VGA adapters, and the Paradise and
Video 7 super VGA adapters.
Note that one RS-232 communication cable, Catalog No.
28044X1, and one g-to-25 pin adapter are supplied with
the CSS.
The following hardware is recommended:
l Computer: An IBM ATTM or compatible computer
with an 80286,80386, or 80486 microprocessor operates
faster than an 808&based computer.
l Math coprocessor: A math coprocessor enables your
computer to perform mathematical calculations faster
than the same computer without a coprocessor. This is
especially useful for SPC operations.
l Color monitor: A color monitor enhances the
- differences between the graphic elements in the data
displays and the various menus.
l Disk drives: A hard disk drive provides faster operation
of the CSS, and it enahles you to maintain all of the CSS
files on one disk.
l Printer: A parallel or serial printer enables you to
acquire hard copies of the various reports that are
available in the CSS.
Your Action
Remove the capfrom
connector J3 on the SLS
Locate the SL.%to-PC
communication cable.
Connecting the SLS to the PC
Befonz proceeding with the RS-232 cable connections,
connect the SLS to its power supply as described in the
SLS User’s Manual. Be sure to remove power from the
SLS and set the PC power switch to OFF. This reduces the
probability of accidently damaging the equipment.
Use the following steps to connect the RS-232 cable
between the SLS and PC.
Comments
Save the cap for possible future use. A cap should always
he in place on an unused SLS connector.
This is the RS-232 communication cable. It has a round
4-pin connector on one end and a 2%pin D-type connector
on the other end.
-
2-2