User`s manual

-
Figure 821 SFC Log Conversion Menu
-
Dataflyte TurboSPC
. PRN
dIMSE JBF
Here is a description of each SPC conversion function:
Text File/Lotus lW.PRN Format
When you select this Save Log function, the CSS converts
the SPC log to a text file, each line of which contains
results data and other data from one SLS inspection cycle.
Figure 8.22 is a sample of a few lines of converted text file.
Fgure 822 Sample of Converted Text File from an SPC Log
2, “06/03/1991”,
“15:28:11.15”,14.1,25,0,0,0,20.07,0,83.5~
2,“06/03/1991”,“15:28:11.15”
,14.1,25,0,0,0,20.27,0,83.4~
2, “06/03/1991”,
“15:28:11.15”,14.1,25,0,0,0,20.12,0,83.35
5,“06/03/1991”,“15:28:03.41”,20.44
5,“06/03/1991”,“15:28:03.46”,20.29
5,“06/03/1991”,‘15:28:03.46”,20.22
In thefirst group of three lines, each line contains eleven
fields, separated by commas. This format appears only
when you select “yes” in the appropriate ‘Log Results?”
jieldr in the SLS Scaling section of the long SPC setup
screen.
The information in each field is as follows:
Field 1 contains the COM port number to which the SLS is
connected. In this case, it is COM2.
Fields 2 and 3 contain the date and time of the trigger that
started the inspection cycle.
8-55